PE-KAYO Series specially designed for the Oil&Gas stations as it has multiple functions. The detector has a special accelerometer chip inside to monitor physical bumps happening on the location where the device installed along with gas measurement functions. It can generate an alarm to cut the gas and oil flow if a car or truck hits the detector or the mounted shaft.
Moreover, the Catalytic sensor employed PE-Kayo shows excellent output in 0-100%LEL range.
Ask the Expert
• Sensor: Uses high-quality catalytic sensor specially designed to detect LPG, Methane, Petrol Vapour, Butane, Propane, and Hydrogen gases in 0-100%LEL.
• Certification: ATEX and IECEx certified PE Series ready to use in explosive atmosphere safely
• Connection: Provides universal standard 4-20mA analog output
• Entry: 1 x 1/2″ NPT cable entries
• Body: Aluminium die-cast body and sensor head superb performance under harsh environmental conditions with IP65 protection class.
• Remote Control: Detector status can be monitored Prosense Gas Monitoring software remotely.
• Relay Contacts: P-3R+ relay module integrated PE Series detectors can manage other equipments or link to firefighting panels.
| Sensor Technology | Catalytic, Motion Sensor: 3 axis (3D accelerometer) |
| Output Signal | 4-20mA and Modbus RS485 |
| Sensor Warm-Up | 60sec |
| Response Time(T90) | <15sec |
| Accuracy | %1 |
| Operating Temperature | ‐40°C ~ +70°C |
| Humidity | 5 ~ 95%RH Non-Condensing |
| Input | Min 10VDC - Max 32VDC - Nominal 24VDC |
| Power Consumption | Max.4W |
| Relay Outputs | 2 Alarms (Selectable) and 1 Fault |
| Cable Entry | 1/2"NPT |
| IP Rating | IP65 |
| Junction Box | Epoxy Painted Die?Cast Aluminium |
| Sensor Head | Nickel-Plated Brass |
| Dimensions/Weight | 172,5x118,15x88mm / 1150gr |
| ATEX Marking | II 2G Ex db IIC T5 Gb |
| Hazardous Class | Zone 1 - Zone 2 |
| Certificates | IMQ 19 ATEX 045 X IECEx IMQ 18.0009X |
| Standards | IEC EN 60079-0 IEC EN 60079-1 |
| P-3R+ | Provides 2xAlarms, 1xFault Relay Contacts |  |
| PK-KEP | Calibration Cap | |
| SP-PEK-ST02-HC | HC LEL Catalytic Sensor Head |  |
| SP-SH10-SIN | Sinter Set(10pcs) for SH Sensor Head |  |
| SP-PEK-GB | PEK Series Enclosure (Excluding Lid) |  |
| SP-PEK-GB-N | PEK Series PEK Lid |  |
| SP-PEK-TB02 | 02 PEK Series Transmitter |  |
Önerilen Ürünler
PE-Kayo Series Datasheet
PE Kayo User Manual
CE Conformity
UKCA Conformity